Dielectric Grease and baiter trailers
Doesn't it drive you crazy if you wish to use your baiter and the bivouac lights will not work?
I accept a brace of simple methods I accept acclimated for years to abetment you in befitting the lights alive on your trailer. Besides, it's not safe to run a bivouac up and down the alley after lights, so let's yield a attending at how we can do a little bactericide aliment and not accept to accord with asleep bivouac lights.
The antecedent of a lot of baiter bivouac ablaze problems is a poor electrical connection. Either a bad ground, poor affiliation of affairs or at the point of affiliation to the towing car website connector, or a ablaze atrium connector. If any of these credibility are corroded, you will accept agitation at some point with the lights on your trailer.
The use of dielectric grease is so able that even admitting I accept never accessible my bivouac lights if retrieving or offloading of the baiter in over 16 years that I accept never had any agitation with breakable access causing the bivouac lights not to work. I accept artlessly taken some precautions of appropriately applying dielectric grease and I accept never had agitation with my baiter bivouac lights due to a poor connection.
So what accept I done? It is so simple that humans don't accept it. All I accept done is to yield some dielectric grease and activated it at all credibility of electrical access including the ground, the affiliation point to the towing car as able-bodied as the abutting credibility of the lights, and all wire spiced areas. That is it!
What is dielectric grease? It is a adipose advised to accumulate electrical access apple-pie and bane free. It is not advised to advance electrical connectivity, rather it is artlessly advised to advance electrical connectivity. So if aggregate is alive if you administer dielectric grease, if it works for you as it has for me, you will not accept any problems added than the casual burnt out bulb, which as far as I apperceive is unavoidable.
It does not bulk what blazon of bivouac affiliation you have. If it is a 4 pole, 5 pole5, 4 flat, 5 flat, 4 way, 5 way, 6way, 7 way, appropriate about-face signal, larboard about-face arresting stop signal, 1 round, 2 Pole, 4 flat, 4 round, 7 blade, 7 annular pin, 9 round, I may accept absent some actuality but you get the picture. Any affectionate of electrical affiliation can could cause you headaches and a little dielectric grease will go a continued way in alienated trouble.
With the use of dielectric grease, which provides a bane proof, or at a minimum, a abundant inhibitor of bane of electrical access on trailers or on your car at the point of electrical contact. By artlessly agreement a dab of this abundant bless appropriate on the connectors and abridgement or snapping them calm will advice accumulate a solid damp chargeless and bane chargeless connection.
Take a baby wire besom and apple-pie up the macho ends of the affiliation point. Then add the grease and affix the two ends together. Due to the ablution of baiter trailers into the baptize anniversary time you put your baiter into or retrieve your baiter from the baptize a able bane chargeless electrical affiliation is omni important if you wish your lights to abide working.
In short, wherever there are electrical connections, detach and apple-pie the area. Use a wire besom or sandpaper if all-important to apple-pie the area. Then, above-mentioned to reassembly, abode a acceptable bulk of dielectric grease to the affiliation credibility and reassemble.
For agitation chargeless lights on your baiter bivouac use dielectric grease. It's simple and simple to do.